MÁY BẤM ỐNG THỦY LỰC YEONG LONG

YL-65 and YL-80 serial production crimpers can consecutive crimping hydraulic hoses or others products for many hours, you don’t need to lubricate the grease oil very often in machines. It’s gear to the factory whose need to crimping lots of output. The scope of crimping diameter from 4mm to 4 inch, if your hydraulic hose need to crimp to above the 2’’4 wires, we recommend you can consider our YL-65 and YL-80.

Our YL-32 2’’ workshop crimping machine is generally used at the hardware store/ workshop. The scope of crimping diameter are from 4mm to 2 inch, which the crimping force reach to 2200kN. We will be attached for 12 set standard dies set (10,13,16,19,22,26,30,39,45,52,64,69mm). *For the maximum installation dies set can be attain to 78mm.

Hydraulic Crimping Machine for Worshop Crimper YL-20S Our YL-20S is for 11/4’’ workshop crimper which the crimping force attain to 1700kN, we will be attach the 9 set standard dies set from 10, 13, 16, 19, 22, 26, 30, 39, 45mm.

Our YL-20 is for 11/4’’ workshop crimper which the crimping force attain to 1700kN, we will be attach the 9 set standard dies set from 10, 13, 16, 19, 22, 26, 30, 39, 45mm. The user can be easily installed the standard dies set and subtly adjusted the dimension for their need on control panel. *For our YL-20/ YL-20S and YL-32 workshop crimpers can be installed in maximum 78mm dies set.